Contour Copier

The essential accessory for copying contours in one go

When you're laying tiles or parquet, making certain cuts is never easy : pipes, door frames and other elements that protrude from the floor are always a headache, as they're not practical to measure.
With this shape copier, no more hassle! The tool acts like a mold that faithfully imprints the contour and allows you to directly reproduce the outline of the area to be cut onto the final support.

How to use it?

Made up of 92 slats forming a 13 cm wide block , and which can be used on either side, the copier can be used in a few seconds:
☛ Place all the slats in the starting position, pressing them to one side.
☛ Place the copier flat on the floor and slide it towards the protruding element, pushing firmly forward to take the exact impression.
☛ Place it on the support to be cut (tile, slat, etc.) and trace the mark obtained with a pencil, following the shape taken by the slats.
☛ Proceed with cutting normally.

Simplicity and speed

It's much faster than taking manual measurements , especially for all rounded, irregular and complicated shapes, which are often difficult to reproduce correctly and require several tools if you want to calculate the angles correctly.
The slats are positioned optimally : tight enough so that a taken impression does not move during copy manipulations, but not too tight either, so that returning to the initial placement is easy.
Their beveled end is designed to make it easier to pass the pencil and so you can clearly see what you are doing.

DIY enthusiasts love this contour copier, which saves them a lot of time and prevents inaccuracies when cutting.

Features